Steering Cylinder,Steering Cylinder Manufacturer,Steering Cylinder Supplier
Sign in | Join Now | Sitemap Inquiry Basket(0)
logo
Home > Standard Parts > Hydraulic Parts > Steering Cylinder

Product Catalogue

Engine Cylinder Block,Cylinder Head Gasket,Main Bearing
All manufactures names, numbers, symbols and descriptions are used for reference purposes only and it does not imply that any part listed is the product of these manufacturer

Steering Cylinder (2)

A Hydraulic cylinder (also called a linear hydraulic motor) is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. It has many applications, notably in engineering vehicles.

Hydraulic cylinders get their power from pressurized hydraulic fluid, which is typically oil. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on each end by the cylinder bottom (also called the cap end) and by the cylinder head where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder in two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end). The hydraulic pressure acts on the piston to do linear work and motion.

 Parts of a hydraulic cylinder
A hydraulic cylinder consists of the following parts: Cylinder barrel/ Cylinder base or cap/Cylinder head/Piston/Piston rod
/Rod gland/Other parts:Cylinder base connection,Seals ,Cushions

Hydraulic cylinder designs
There are primarily two styles of hydraulic cylinder construction used in industry: Tie rod style cylinders and welded body style cylinders.

Tie rod style cylinders
Tie rod style hydraulic cylinders use high strength threaded steel rods to hold the two end caps to the cylinder barrel. This method of construction is most often seen in industrial factory applications. Small bore cylinders usually have 4 tie rods, while large bore cylinders may require as many as 16 or 20 tie rods in order to retain the end caps under the tremendous forces produced. Tie rod style cylinders can be completely disassembled for service and repair.

Welded body cylinder
Welded body hydraulic cylinders dominate the mobile hydraulic equipment market such as construction equipment (excavators, bulldozers, and road graders) and material handling equipment (forklift trucks, telehandlers, and lift-gates). They are also used in heavy industry such as cranes, oil rigs, and large off-road vehicles in above-ground mining.

Special hydraulic cylinders
Telescopic cylinder
Plunger cylinder
Differential cylinder
Rephasing cylinder
Position sensing "smart" hydraulic cylinder

World famous brand:PARKER®, RUHFUS®, HAENCHEN®, HKS®ï¼ŒHELAC®

\r\n\r\n